Have you had this happen to you? You purchase an alternating pressure mattress and after a year or possibly two the center of the mattress becomes soft and sinks in the middle? This is not uncommon with an alternating pressure mattress system. Why does this happen?? Alternating pressure mattresses normally use a compressor based pump. This pump is designed to establish air pressure within the mattress then alternate the cells to reduce pressure and stimulate blood flow. The problem is if a seal is not properly established the first section to deflate is the center of the mattress. This happens because the center of the mattress is where the “low air loss cells” circulate air flow. In other words these cells have laser holes in the center. If pressure cannot be established , or if a leak is present it will cause this section to deflate first.
This can most commonly be prevented by using the static feature to enter or exit the bed. or Make sure the CPR values are closed completely.
The easiest way to avoid this problem is to change to a true low air loss mattress. These mattresses use compressor pumps circulating air flow at a rate of 1000-1700 liters of air per minute through the mattress. These mattresses are less likely to bottom-out and offer more features in comfort and advanced healing.
Margaret Schmidt from Houston TX said “changing to a true low air loss mattress helped my husband tremendously. He sleeps better at night, and no longer has to deal with the blow out in the center of his bed.” “He loves the pulsation and alternating features on the Pro Max and we no longer worry about reoccurring bed sores.”
The true low air loss system Ms Schmidt selected was ideal for long term care. Her husband had a stage 3 bed sore that healed and she was using this system because he was spending more time in bed. The pro99 max true low air loss mattress had both pulsation and alternating features for her husband to choose from. The Pulsating air suspension therapy uses small pockets of air, individually inflated and deflated to cause a pulsation. The Pulsation therapy will cause the blower system to reduce the air flow in the mattress system every 30 seconds to 50% of the comfort setting pressure. The internal control sensor continuously monitors interface pressure for optimal redistribution.
If you are experiencing problems with alternating pressure mattresses and need a reliable long term care solution like Ms Schmidt please consider the Max True Low Air loss system.